MotionLab

Build the cell.
Program the robot.

An industrial simulation workspace for assembling robot cells, teaching motion, and testing how robot programs, PLC logic, and factory devices interact.

Saved MotionLab workcell with orange robot arms, a loop of roller conveyors, and a pallet
The saved MotionLab workcell combines six-axis robot arms, a roller-conveyor loop, sensors, and pallet handling.

Position the tool in the viewport

MotionLab can work with several robot models in the same cell. Use the six-axis TCP gizmo to move or rotate the selected tool in world or tool coordinates. The preview shows the target pose before a move is committed.

Medium six-axis arm in MotionLab with coloured translation and rotation handles at the tool
The medium arm’s TCP gizmo lets you drag the tool along an axis or rotate it around one.
Compact six-axis arm in the MotionLab cell
The compact arm on its mounting plinth.

Program on a working teach pendant

Jog joints or the tool center point (TCP), define tool and user frames, teach waypoints, and write retained programs. Use HOME and point-to-point instructions for joint moves, SLIN for straight paths, and SCIRC for arcs. Step through instructions, set breakpoints, or run a cycle in the simulated AUTO mode.

MotionLab teach pendant open to the Program page with the medium six-axis arm selected in the conveyor cell
The selected robot’s teach pendant shows the loaded program and its taught points alongside the workcell.

Pick sequence from the demo cell

WAITDI DI_SINK1_OCCUPIED TRUE
SPTP P1 VEL=1 ACC=1 JERK=10 APO=0
SLIN P2 VEL=0.2 ACC=1 JERK=10 APO=0 ORI=VAR
SETDO GripperClose True
WAITTIME 0.5

Connect robot actions to the cell

Robot programs and factory devices share symbolic digital I/O. A program can wait for a photoeye, switch a gripper or vacuum output, and read feedback before moving on. Device faceplates expose live state for conveyors, sensors, sources, and sinks.

MotionLab robot workspace showing digital inputs and outputs alongside the simulated robot cell
The robot workspace shows the I/O available to the program next to the workcell.

Write and observe PLC logic

Build visual ladder (LAD) rungs or write SCL blocks. Map typed tags to the simulated sensor and actuator bus and use timers, counters, and online watch. Run, stop, or single-step the scan to see how a change to an input affects the cell.

MotionLab PLC Workbench with program blocks and online tag values
The PLC workbench brings automation logic and tag inspection into the same project.

From cell layout to hardware tests

MotionLab brings layout, robotics, PLC, and controller sessions into one project. The hardware work is still in development.

Build a cell

Import URDF robots and assemble resizable conveyor sections, pallets, sensors, and fencing with compatible snap points. Save the cell with its installed tools and programs.

Supported controller work

The hardware workspace supports loopback testing and an SO-101 bridge for physical feedback and joint control. The real-arm bridge still needs calibration and supervised bench validation.